Dry Prime Trash Pumps

Home : Product Lines : Dry Prime Trash Pumps : Solids Handling Dry Prime Compressor Assisted JSC Enviroprime® Series

Solids Handling Dry Prime Compressor Assisted JSC Enviroprime® Series

Thompson Pump’s JSC Enviroprime® pumps are an automatic priming centrifugal pump series that provide flows of up to 11,00 GPM and heads up to 660 feet. The pump series can handle solids up to 4 inches and is ideal for sewer by-pass pumping applications, emergency flood response, and any other applications that require the transfer of liquids that contain solids. The Enviroprime® priming system, unlike most automatic priming systems, prevents product blow-by of pumpage, such as sewage, effluent and waste, from being discharged onto the ground or through hoses that carry the pumpage back to the source, making it environmentally friendly. The durable construction and the highly efficient pump ends provide longer life and economical operations, but most importantly, lower fuel costs.

Solids Handling Dry Prime Compressor Assisted JSC Enviroprime® Series

Applications

Construction: Wellpoint installation; equipment wash down; pilings; pre-wet operations

Waste Treatment: Sewer bypasses; pumping polluted hot or corrosive wastewater containing sand, mud or solids in suspension; force main pumping; dosing neutralizing liquids; pumping out settled sludge

Industry: Water jetting and blasting; piping system surcharging and pressure testing; waste pumping; flood drainage; fire fighting; recovery of hazardous liquids; transfer of neutral, acid or alkali clean or dirty liquids containing sand, mud or solids in suspension

Mining: Wash-down operations; tailings; high head/high volume applications

Marine: Barge cleaning and wash down; pile jetting; dock installation

Agriculture: Irrigation; dust abatement

Note: Alternate pump end materials available for corrosive liquids

Features

  • Exclusive Enviroprime® Compressor-Assisted priming system on all models

  • Capability of dry priming and automatic re-priming

  • Large solids handling capability – up to 4 inches

  • High pressure capability for jetting or pumping into force mains

  • High capacity performance

  • End-suction centrifugal pump end

  • Heavy-duty cast iron casing and brackets

  • Stress-proof stainless steel shaft sleeves

  • Cast iron impeller and wear rings

  • Abrasion-resistant tungsten carbide vs. silicon carbide mechanical seal

  • Discharge priming valves

  • Suction and discharge fittings

  • Safety shutdown controls

  • Variable speed engine control

  • Available with auto start controls

 

* Additional Engine, Trailer and Canopy options available.